Hi,

how to update Varnish HTTP Cache v5.2.1 outdated version released over 2 years ago on 14 November 2017 to the latest version of Varnish HTTP Cache v6.3.1 which was released on 21 October, 2019 for CWP (Centos Web Panel) and CWP PRO (Centos Web Panel Pro) for Centos 7 !

This is the official link for this latest and stable release of Varnish HTTP Cache v6.3.1:

https://github.com/varnishcache/varnish-cache/releases/tag/varnish-6.3.1

This is the official link for the changelog of this latest and stable release of Varnish HTTP Cache v6.3.1:

https://github.com/varnishcache/varnish-cache/blob/6.3/doc/changes.rst

Thanks in advance for the support.

@sandeep Very very good news !

@sandeep said in Update Apache v2.4.41 to latest and stable Apache v2.4.43 for CWP & CWP PRO!:

rebuild webserver config.

Hi @sandeep works perfectly, thanks for the support, you are the best !

Hi @sandeep,

I have installed and rebuilded the Web Servers with Nginx & Varnish & Apache.

Varnish not start and i have this error:

● varnish.service - Varnish Cache, a high-performance HTTP accelerator
Loaded: loaded (/usr/lib/systemd/system/varnish.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Mon 2020-06-29 17:00:15 CEST; 15min ago
Process: 1247 ExecStart=/usr/sbin/varnishd -P /var/run/varnish.pid -f $VARNISH_VCL_CONF -a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} -T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT} -S $VARNISH_SECRET_FILE -s $VARNISH_STORAGE $DAEMON_OPTS (code=exited, status=255)

Jun 29 17:00:15 server.mywebserverexample.com varnishd[1247]: Error:
Jun 29 17:00:15 server.mywebserverexample.com varnishd[1247]: Message from C-compiler:
Jun 29 17:00:15 server.mywebserverexample.com varnishd[1247]: /bin/sh: /usr/bin/gcc: Permission denied
Jun 29 17:00:15 server.mywebserverexample.com varnishd[1247]: /bin/sh: line 0: exec: /usr/bin/gcc: cannot execute: Permission denied
Jun 29 17:00:15 server.mywebserverexample.com varnishd[1247]: Running C-compiler failed, exited with 126
Jun 29 17:00:15 server.mywebserverexample.com varnishd[1247]: VCL compilation failed
Jun 29 17:00:15 server.mywebserverexample.com systemd[1]: varnish.service: control process exited, code=exited status=255
Jun 29 17:00:15 server.mywebserverexample.com systemd[1]: Failed to start Varnish Cache, a high-performance HTTP accelerator.
Jun 29 17:00:15 server.mywebserverexample.com systemd[1]: Unit varnish.service entered failed state.
Jun 29 17:00:15 server.mywebserverexample.com systemd[1]: varnish.service failed.

Please help me to solve this problem and thanks in advance for the support !

@sandeep said in How to update Varnish HTTP Cache v5.2.1 outdated version released over 2 years ago to the latest Varnish HTTP Cache v6.3.1 for CWP and CWP PRO for Centos 7 !:

hi this isn't possible since we can install it but cwp can't detect it.

Hi "sandeep",

The new stable version of Varnish v6.4.0 has been released. Do you think it can be updated on CWP (Centos Web Panel) and CWP PRO (Centos Web Panel Pro) for Centos 7 because the version of Varnish v5.2.1 that is currently installed is really obsolete and released over 2 years ago on 14 November 2017.

You can help us install the new stable version of Varnish v6.4.0 writing one of your fantastic guides ?

This is the official link for this latest and stable release of Varnish HTTP Cache v6.4.0:

https://github.com/varnishcache/varnish-cache/releases/tag/varnish-6.4.0

This is the official link for the changelog of this latest and stable release of Varnish HTTP Cache v6.4.0:

https://github.com/varnishcache/varnish-cache/blob/6.4/doc/changes.rst

Thanks in advance for the support.

@sandeep said in Update Apache v2.4.41 to latest and stable Apache v2.4.43 for CWP & CWP PRO!:

rebuild webserver config.

Hi @sandeep works perfectly, thanks for the support, you are the best !

Hi, wow to enable Nginx FastCGI Cache for CWP and CWP Pro ?

Thanks in advance for the support.

@sandeep said in Update Apache v2.4.41 to latest and stable Apache v2.4.43 for CWP & CWP PRO!:

@Automata fixed follow the commands once again.

Hi Sandeep B.,

It would be nice if this update to apache v2.4.43 were integrated into CWP and CWP Pro.

Apache v2.4.43 is installed but not run and this is the error log:

● httpd.service - Web server Apache
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Fri 2020-06-19 07:58:20 CEST; 13s ago
Process: 2620 ExecStart=/usr/local/apache/bin/apachectl start (code=exited, status=1/FAILURE)

Jun 19 07:58:20 your.server.com systemd[1]: Starting Web server Apache...
Jun 19 07:58:20 your.server.com apachectl[2620]: (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
Jun 19 07:58:20 your.server.com apachectl[2620]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
Jun 19 07:58:20 your.server.com apachectl[2620]: no listening sockets available, shutting down
Jun 19 07:58:20 your.server.com apachectl[2620]: AH00015: Unable to open logs
Jun 19 07:58:20 your.server.com systemd[1]: httpd.service: control process exited, code=exited status=1
Jun 19 07:58:20 your.server.com systemd[1]: Failed to start Web server Apache.
Jun 19 07:58:20 your.server.com systemd[1]: Unit httpd.service entered failed state.
Jun 19 07:58:20 your.server.com systemd[1]: httpd.service failed.

Please help me to solve this problem.

Thanks in advance for the support.

@sandeep for me not work i have deleted PHP-FPM 7.3 and i have installed and resetted the php 7.4 options.

I have this error:

No package 'oniguruma' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables ONIG_CFLAGS
and ONIG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.
mkdir: cannot create directory '/opt/alt/php-fpm74/usr/var/sockets/': No such file or directory
mkdir: cannot create directory '/opt/alt/php-fpm74/usr/etc/php-fpm.d/': No such file or directory
mkdir: cannot create directory '/opt/alt/php-fpm74/usr/etc/php-fpm.d/users/': No such file or directory
/usr/local/src/php-fpm-7.4.sh: line 98: /opt/alt/php-fpm74/usr/etc/php-fpm.d/users.conf: No such file or directory
/usr/local/src/php-fpm-7.4.sh: line 99: /opt/alt/php-fpm74/usr/etc/php-fpm.conf: No such file or directory
/usr/local/src/php-fpm-7.4.sh: line 101: /opt/alt/php-fpm74/usr/etc/php-fpm.d/cwpsvc.conf: No such file or directory
cp: cannot stat 'sapi/fpm/php-fpm.service': No such file or directory
sed: can't read /usr/lib/systemd/system/php-fpm74.service: No such file or directory
sed: can't read /usr/lib/systemd/system/php-fpm74.service: No such file or directory
Failed to execute operation: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Skipping as php build failed
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Skipping as php build failed
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Skipping as php build failed
exe:/opt/alt/php-fpm74/usr/sbin/php-fpm
Redirecting to /bin/systemctl restart httpd.service

Build Completed
###################

Error:Can't add notification!

Please help me and thanks in advance for the support.

@sandeep said in Install php 7.4 on cwp:

@Automata actually some server having package config missing which are present in our test server, probably new php is released today

Hi @sandeep ,

I have installed latest CWP PRO update from CWP PRO v0.9.8.990 to CWP PRO v0.9.8.991 and the update to PHP-FPM v7.4.x not work.

Please help to solve this problem.

Thanks in advance for the support.

@sandeep said in Install php 7.4 on cwp:

yes working on it right now

Thanks for the support, you are the Number ONE !

@sandeep said in Install php 7.4 on cwp:

@JosePP released

Hi @sandeep,

The update to PHP-FPM 7.4.x not work.

Was also reported by another user in the official forum at this link:

http://forum.centos-webpanel.com/index.php?topic=9192.0

Thanks in advance for the support.

@sandeep said in ModSecurity works on NGINX + PHP-FPM webserver ?:

@Automata nope its only for apache for now.

In this case, i can disable both Mod_Security and Apache since i only use NGINX + PHP-FPM as a webserver ?

In your opinion, between how much it will be possible to have Mod_security also for NGINX for CWP PRO ?

Thanks in advance for the support.